Autoclaved Aerated Concrete Production Line
            Autoclaved Aerated Concrete Production Line
            Autoclaved Aerated Concrete Production Line
            Autoclaved Aerated Concrete Production Line

            Autoclaved Aerated Concrete Production Line

            Brief Introduction
            Flow Chart
            Main Parameters
            Application
            Autoclaved Aerated Concrete, in short as AAC, is a new type of light weight, multi-cells construction material. The features include simple in processing, fast in construction, low density, heat insulation, processibility, earthquake resistance and sound resistance properties.
            AAC is made from silicon material (silica sand, or recycled fly ash and silica gangue) and calcium material (lime, Portland cement), mixing with a small quantity of foaming additive (aluminum powder). The main raw material is fly ash or silicon sand. Fly ash is main waste from electricity power station.
            Up till now, AAC is the best choice to replace clay brick. It will dig too much clay to produce clay brick to destroy the earth terribly.With abundant air cells and micro apertures inside the aerated brick, it has good performance of heat insulation and preservation.

            In addition, the most prominent advantage is its plasticity. Due to the lightness and the lower hardness, AAC units are available in numerous shapes and sizes according to the real construction usages and customer’s requirements.
            From the manufacturing processing and application with good insulation, AAC is a kind of green building material.

            Remark: The accurate batching rate is adjustable according to local raw material.


            Technics Index and Autoclaved Requirements
            1. Raw material mixing and pouring cycle: 8 minutes
            2. Base body static curing time: 1.5-3 hours
            3. Static curing temperature :40°C
            4. Strength after static curing: 0.2-0.3Mpa
            5. Base body cutting cycle: 6 minutes
            6. Autoclave pressure:
            Vacuuming: 0-0.06 Mpa, 0.5hour
            Rising pressure: 1.2 Mpa (temperature 193°C±5)
            Working pressure: 1.3 Mpa, 7.5hours
            Falling pressure: 1.2 Mpa-0, 2hours
            7. Raw materials batching rate:
            Sand (or Fly Ash): 69%
            Lime: 20%
            Cement: 8 %
            Gypsum: 3%
            Aluminum Powder: 0.074%

            ITEM UNIT HIM-AAC-10 HIM-AAC-15 HIM-AAC-20 HIM-AAC-30 HIM-AAC-45
            Capacity x103m3/year 100 150 200 300 450
            m3/day 350 500 700 1000 1500
            Block Size m3 4.2x1.2x0.6 4.2x1.5x0.6 4.8x1.2x0.6 6.0x1.2x0.6 6.0x1.5x0.6
            Installation Power kw 800 900 1100 1300 5400
            Workshop Area m2 2500 3000 4000 5000 6000
            Plant Area m2 20000 25000 30000 35000 40000

            Product Catalog